Just so you know not all electric chokes are designed to work off of the 'Stator' connection on the alt as a power source, And not all fords used...
_The kit comes with a strip of plastic which is about .030" in thickness. Insert that between the pickup and rotor and adjust the module to that....
Have run a Pertronix for almost 20 years and never had any problems. Will be running another one in my current project. They now have a...
That should already be driven by the alt belt. If not reconfigure it that way. RS
You can remove the pump and hoses and the ram. But you are going to have some pretty sloppy steering without any other modifications. Better to...
The pcv is there to recycle crankase vapors. And to keep internal pressure from blowing out seals and gaskets. Not to lube the rings. Brillance...
If you are wiggling the dimmer and the lights flicker back on it may just be the dimmer that's bad. Try jumpering across the wires on the dimmer...
Sounds like the seals were never replaced when the other work was done. Explains why the plugs are fouled where the seals that were cracked or...
You are confused about refrigerants being flammable. They used to use refrigerants as the propellents in spray cans. That was not flammable as...
Why would you be trying to disconnect fittings with refrigerant still in the system? You are going to get oil and refrigerant in your face or all...
The stock ford pump pickup screen (V8) has a grommeted hole in the center. If the screen gets spread away from the center cross piece it opens up...
Most of the oil stays in the compressor, some stays in the evaporator and some stays in the condensor. But a little of it does circulate with the...
They are called 'valve stem seals'. They get hardened over time from the heat and fall apart. Hopefully they don't get down into the oil pan. Just...
Forget the Duraspark or MSD. Install a Pertronix III and you will have a complete ign with Multi-strike and a rev limiter. And it fits inside a...
Tapping into the short wire from the ign sw to the pink resistor wire is the correct place to connect. You will have no problems that way....
Whatever you do, DON'T cut the pink wire or try to splice into it. You will have problems. Splice into the short wire between it and the ign sw....
That's right. When ford introduced the SROD they also built a 2wd all aluminum case version also with the shifter in place of the top cover. It...
I was in the middle of posting some more info on the SROD but lost it when I was trying to post some pics. Try 5speeds.com 561-743-5600. Talk...
SERE guy, As I mentioned before yours is a Mustang version SROD not a fake toploader as pictured and mentioned on David Kees' website. Those are...
The Pertronix III is their newest version. So far very few dealers list it. Try CJ Pony as they do list it. If I were to use anything that would...
Separate names with a comma.
