If somebody could remove that link I put in there, Id be greatful!! Thanks and sorry bout that once again!
WHOOOOOOPS!!!! Sorry bout that! LMAO!! :rofl2: Wrong Kind of injection there,,,
You can get a throttle body from any vehicle you choose, threre are TBI EFI conversion kits out there, that all ya got to do it Hook things up,...
had simular problems like that,, the "mod" was damaged, replaced it, worked alot better. when it didnt work, I could hook up the vac line and the...
Ive got a few 8.8 rear axles from a couple different Ford Rangers. one is a 86, ones a 88 one is from a 95. Will any of them bolt into the...
If its got good oil pressure, Id treat it like a new one for a while, maybe change the oil a few times, see what the pressure looks like while...
OK, What else was in the pan? Lots of fine shavings? Whats inside the oil filter??? Cut it apart and look. If there is alot of shavings in the...
Hey scoop, before you do, go run a compression test on it first! Take all the plugs out, hold the throttle wide open and crank it a few times....
Its got 6 bolts in the bellhousing to the block, 157t flexplate, small bellhousing, 88 engine block, it bolted right up. So far, the...
How about the birth of the C4,,,, cause the one I have is an aluminum case, case fill. And, apperently has the cruiseomatic valve body. Had a 66...
The ol Maverick is solid as a rock! Even the floors/vents, trunk had good paint on all the surfaces. Recently, the car was sold,, they never paid...
Reason for asking, was looking at an old repair book on 65-66 mustangs,, very simular suspension design to the maverick,, They showed shims to...
1970 Maverick, with a V8, auto tranny. Was a 6 cyl car. Front end sits alot lower from the V8 swap. Happen to notice,, this car has no shims...
New modulator, works like new! Old mod, was banged up,,, the adjuster screw, was backed all the way out. I measured the travel the the modulator...
I had a 66 Ranchero back in high school,, I think it had D, D2 and L on the column selector??? I had the 70 transmission still, it used the same...
Been having some trouble out my C4. It was a junkyard tranny, said it worked when they pulled it,, took their word on it,, but anyways,,, it does...
I can make it the box,,,, and going for more of a custom look to the engine, and keep more of the original car in plain sight. Not a fan of...
Only problem I can for see is manifold vacuum pressure being dropped to low, by the design being to large to operate a stock engine. If the vacuum...
Has anyone ever built a sheet metal upper plentumn for a Speed Density 5.0? Like, build a box that will bolt on to the stock lower intake, and...
Separate names with a comma.
