We just did a 72 camaro with Calvert's rancho shock, split monoleaf, and caltrak set up. They work great. I've also used a set of 15 dollar...
comp engineering makes some. They work ok depending on your budget and use. I'm going with AFCO this time around though. Much nicer and more...
I have a similiar combo but a 331. 750 hp carb will do fine, should work at about 7000-7500 rpm, try launching around 2000-2200, need more gear...
I was running a milodon on mine, but I'm going to something better when I put it back in the car this time. The milodon has no trap doors, no...
I go to Farmington alot in the fall. It's a great track! One of the best hooking tracks I've raced on and i've raced quite a few up and down the...
I believe that site belongs to Dave Schultz. He races mopars in the NMCA series in Nostalgia Super Stock and Nostalgia Muscle Car classes. Texas...
Also, just because a nitrous company advertises a 150 shot, it doesn't always equal 150 to the rear wheels.
I think you should loosen up the converter. 3500 is not much considering the heads and the gear. It will also depend on the camshaft you choose....
The sides for the main hoop should be close to the rocker panel. Then take the diagonal bars to your subframe connectors. They will probably be...
I remember my first time. My left leg was jerking on the clutch pedal while I was staging! I don't know why I was nervous. I 'll guess 15.60's on...
Hey Jake, I was looking for the article you did in FSC about the aerospace brakes you put on your mav. I was curious what mastercylinder you used....
Yea I would keep the fuel pressure below 7 lbs. atleast. I run 6lbs. on mine with my BG280. Make sure you have a good regulator also. Go ahead and...
I know some people don't like to but I cut the floor to install mine. I put the new 1 1/4" box tubing inside the factory frame rails on both ends....
Anyone looking for a good race this fall should check this race at Farmington Dragway in NC. Lots of really good racers and I think it pays about...
Not many straight stretches of road in Boone are there! I'm about 45 minutes from Boone in TN.You have to know some of the Trivettes if you're in...
You should'nt have any problems with the 8" rear for now. A 7.0 car in the 1/8 mile would probably start to push the limits of the stock axles...
I use 4.86 for 1/4 mile and in the fall i put in the 5.43 for 1/8 mile. The convertor is pretty loose too!
Yea my car is all 60 ft too. Usually in the high 1.30's with a best being 1.36
That's good mph. I'm usually racing in Bristol TN so the air is not as good. I run in the 10.90's here but only run 118 to 119 for mph.:thumbs2:
Yea something a little off with those times.:hmmm: I run mid 6's too but usually in the 10.70 to 10.80 range in the 1/4. I run a lot of gear so my...
Separate names with a comma.
