I have read the same report that BMCDaniel has. The Fram endcaps are made of cardboard. How well does cardboard stand up to oil? Just imagine if...
With the flashers and signals not working. Make sure the lights in the taillight housing are all pushed in and ground good. By this I mean the...
In the Ford catalog The black gear is listed as a 20 tooth gear for a manual trans and the 21 tooth for the manual is red I was talking for an...
The ford 21 tooth gear is purple that is the one I am using. I got it at my local dealer. It is listed in the Ford Racing Catalog Part # D0OZ-B...
You need to find out if it is a one piece or 2 piece seal. The older engines use a rope type 2 piece seal that you can replace with the engine and...
My worst moment was with a 1971 International Travelall. It was my Dad's truck and it was old and rusty but it was reliable. I pulled it into the...
It did not come with my pump. It was a seperate item. I bought it from a local speed shop but Summit does have the ARP too.
I do know the 351 is bigger than the 302. I have always used a hardened one in my 302. The stock ones can twist up at higher RPMs
I have the hedman headers -- the elite version for the Maverick with trick flow twisted wedge heads. You can not use a column shifter and you...
Was it a Maverick or a comet? I have seen a comet over here on the other side of the river with that description (South County) at car shows, it...
I have tried a couple different 100 amp chrome alternators with no luck. The difference may be that I used the same hook-up type and did not move...
When is the deadline -- I want to get one in but still have yet to get a good digital camera-- I might just scan a photo I have??
Aggree with Max
Just a note to the last post refer to the cam instuctions for runtime and speed for breaking in the cam. It usually is 2500-3000 RPM with some...
Not Sure I have the same headman part number but I had to make a spacer I believe it was about a half an inch and using the drop braket and it...
Just some other points you might check. Make sure the converter bolts are tight and also make sure the vibration is not coming from the fan....
Slyvania SliverStars They make a sealed beam replacement light -- very happy with them
Does this setup have a mechincal fuel pump? I know between 71 and 72/73 there was a change to the cam gear one is thicker and one is thinner. If...
I agree on double checking things out more before buying any parts. It has been awhile since I tore down one of the six cylinder carbs but...
You can set your points with simple hand tools. You will need a feeler gauge and a screw driver. Turn you engine over preferably by hand until...
Separate names with a comma.
