My winter toy... ...a '02 Liberty with a 2.5" lift, BFG 245-75-16s, rock rails, lighting, hitches front and rear, and other goodies......
17" Cragar SS A rather large pic of said animal can be viewed at http://www.geocities.com/atzy.geo/mav2.jpg I know it's nowhere near the...
As the white guy takes his "girlfriend" back to Compton driving his Escalade, he starts an improv rap...his last line is "look, there's a Ford...
Bench seats interchange (but the 2-door ones fold--a bonus) Windshields are the same (pretty sure on this one) Not sure about the back...
Well... ...there's a shipyard in Bremerton, and one here in Maine where I currenty am. If you'd like, I can ask around...but I haven't seen a...
Max, you're D-shiznit. :) NWO, I would seriously consider your intentions with the 351. Don't get me wrong--$800 is very reasonable for the...
Hate to say it... ...but my reply will probably be the obvious: 1. If you have the newer (plastic-type) PS pump, then you could consider...
Yo... NWO, I know that Max didn't mean that mean or anything. I think his reaction, kind of like mine, is...why not? Many folks on the board...
Insight... When I got my leaf springs replaced, I was talking with the shop owner, and his books/computer/et. al. indicated that there were at...
Can we... ...get a shot of your taillight panel? That looks trick and I'd like to add it to my list of ideas! Bests, Atzy.
What I did... I would think that the 5-1/4 would fit like gold. I put 6" in mine, but there ended up being a little hole near the top of the...
Well, yes... ...and wiring right into the stoplight sw harness might be the best way to do it too. Fewer things to break and all. As for the...
What is... ...that little handle in your tailgate? Thanks, Atzy.
Ooops, I didn't mean to say "I stole one...from K-mart." What I meant was "I legally obtained a kit similar to one from K-mart and used the...
I did... ...and here's a picture where you can kind of see it. I got it from Jegs. They don't have the swivel base satin anymore, so you will...
Yeah, what he said... I've had the same questions for a while. Besides sitting there for an hour and trying to figure out which screw and wire...
So the bottom line is... To convert, all you need to do is remove the assist cylinder, pump and hoses, then replace the pitman arm and center...
So like... If you used the trunk latch and pin, then you could have a locking hood...right? Random question, Atzy.
Interesting... Although I don't intend to do the transformation anytime soon, I greatly appreciate the continued input. MavMark, I E-mailed...
I'm thinking of busting my '75 4d down to parade rest and building it back up again--the ultimate American adventure. I am looking for insight...
Separate names with a comma.
