just a quick question guys, what the difference between internal and external balance, say i have a 157tooth 28oz internal balance and a 157tooth...
ya wasn't sure im probably just going to by an after market pedal of some sore for the hydraulic setup. ill probably use a wilwood pedal, i just...
i have a nice big blue one and i think its a lot better then having a old style coil on the intake, it looks cleaner then the original that's for...
ya that doesn't sound very good, if the trans isn't completely centered to the motor could that wreck the trans? i was a little interested in the...
well isn't that style better then using a fork and slave set up? do you know what he means when he said that "You must reset the zero end play"?
Just had another question that i can seem to find anywhere, i'm trying to find if there was any year of veridical that ford used a T5 and a...
ok, so i can just use a stock flywheel if i wanted to for an early 302 (28oz) 157 tooth? would this one be compatible?...
i am in the process of looking for a flywheel now, and i was wandering are the flywheels for T5's mated to a 302 the same size as earlier...
i would be interested in the measurements also because i plan on making one from scatch.
ok, ill take a look thanks.
you need to knock the roll pin down through the hole. you can use a drill bit that fits the hole and a hammer if you dont have roll pin drifts....
Heres is a few pics of what i'm talking about.
ok i have a new question for you guys, im in the process of taking my newly aquired trans apart at put new seals in it and im having trouble...
oh ok got it now, then i will need a new starter,flywheel(28 oz 157 tooth) and a 10.5" clutch. that clears that up a bit. I have another question...
I thought that the starter would work since its the same size flex/flywheel, is it a different bolt patten?
Block Plate? you mean the thin metal that has the inspection cover on the bottom, that goes between the block and trans?
Yes the trans and bell housing is from a 91 stang
ok i got the trans yesterday now im looking at the parts i will need for the trans itself, specifically the flywheels, what type should i be...
Good info, thanks a bunch.
So how well will i be able to tell the condition by shifting it(even though its out of the car)?the guy said it moves freely through the gears.
Separate names with a comma.
