I may be there, it would be a good way to kick off my retirement from UPS on Friday!
A bad condenser could cause these symptoms.
There is a metal clip that slides into tabs on the bottom of the plastic cover. The column wiring runs through there also, so it can be a pain to...
You have replaced the tumbler part of the ignition. The switch is further down the column and the two connect by a rod. [ATTACH]
Can't see the pic...
I may have one, if you want me to check let me know.
If your engine has a lot of miles on it the timing chain may have jumped a tooth. Check the initial timing, if it is retarded and the distributor...
Good to hear
The pin is attached to the key switch inside the housing. You access the pin through the small hole in the housing that is visible in Toms pic....
Welcome to the forum :Handshake:
That's a universal kit that won't work with the factory Maverick suspension.
Thanks, we cut a full coil off the front and at first it seemed like too much. But after living with it for a while I think it'll be ok. If it...
The tires are a pair of old toyo's that have been collecting dust. The rims are from a late seventies Dodge Magnum and I believe they are 7 inches...
Test fit the 275/60/15 tires on my sons car. Had to use 3/8th's spacers so will need to install longer studs, but looks like it's gonna fit....
Had the same issue with an F250, ended up being a weak fuel pump.
Those look better than the oem panels.
Looks like that left pipe just squeaks past the tank.
Welcome to the community, from Spokane WA!
Just renewed, thanks Stefan!
If you have a disc/drum master cylinder there may be a residual pressure valve on the rear line.
Separate names with a comma.
