Is it possible to tighten something to make the steering column not have any play? I have two inchs of play when driving on the highway and if I...
http://www.ebay.com/itm/FALCON-TORINO-COMET-BRONCO-MUSTANG-TURN-SIGNAL-SWITCH-/260319467326#vi-content
Easy way would be to jack up the front and then cut it so the spring doesnt have as much tension. If I ever have to do this again I will cut it or...
FML... I had to replace the springs last night on my Mav and it was the hardest thing I have ever had to do. I'd rather pull my engine 6 times...
Honestly the head gasket is a very easy job. All you need is the correct tools. Torque wrench, correct socket and the torque specs which are 55lbs...
Well then the ignition switch should be attached to the cylinder. I didnt know they had mavericks with it on the dash. Wish mine was like that....
My guess would be in the steering column where the ignition cylinder is. When you turn the key it should make that connection and know when it has...
Check all the fuses and all your connections from battery to firewall just for starters, maybe the ignition switch burnt out?
Yeah it was from one c4 to another same size bell. I pulled the first one off wrong. Got it installed.
:rofl2:Someone should be able to answer this.
Sucks all that work and now I have a bad transmission fluid leak. Probably loose a quart a day. Going to let the tranny shop fix the leak. I used...
I was thinking the same thing. :thumbsup:
It must have been the way I seperated the older bellhousing. On my good transmission with the bad stripped starter hole it came off by its self...
I know how to calculate the mileage, im just nervous about trying to run the car and find out how much MPG I get after I hit half a tank because...
Ok im about to change bellhousings and wanted to know if im doing this the correct way. I removed the smaller shaft gear thing and removed all the...
This was actually going to be my next thread about removing and installing the bell housing. Torque specs etc. Thanks for letting me know about...
From the looks of it, I can have either one of these cranks installed in my engine. 2M-2MA-2MAD Not sure what that tells anyone, im looking it up...
I have an exhaust upgrade, I guess you can call it that. Im running hooker 6901's with true dual flow master 40 series. I have money, Im just...
The carb is a motorcraft 2150. Im not looking for 500hp although that would be nice :D. Keep in mind this will be a daily driver back in forth...
Yeah I drive on hwy 75 it does suck badly. I have a dummy I sit in the passenger seat and take the HOV. LOL:bananaman
Separate names with a comma.
