I plan on it that's why I wanted to ask some questions before I dive in and buy parts. As far as the cam goes I would need to pull the oil pan and...
I will be sure to inspect everything as I don't want this to happen again. I will post on this thread what I find out over the weekend. Thanks again!
The lower threads on the transmission did strip out and I put a nut and longer bolt, same thread on the back of it to keep it in place, but it...
Correct, It did come with an FMX that I couldnt use because of the spline count. I bought a 66 mustand c4 and bought a seperator plate that...
Thank you for your help!! :Handshake
I would want to keep the 2v carb I have since I spent $300 on it last month. I would be going with a 2v intake like an edlebrock or something...
I just ment keeping my block the way it is and adding aluminum heads and a better intake to get a little more HP. I didnt know if there was...
Thank's for the link! Isnt there more to it than that? like the push rods and lifter matching the head and being the correct length?
Not sure if this has been answered before, but im curious and want to know how you go about finding the correct intake or cylinder heads that will...
Rick, The motor is from a 79 Ford LTD, Torino, Fairelane is what the decoding told me. So I've been buying parts for the LTD and they have all...
So with that being said I should buy a flexplate for a 74 comet and get the comet starter as well? Just curious but arent the comet and maverick...
Well bad news a good 7 inchs is shaved off the flexplate. Looks like in dropping the tranny again....... I do have the separator plate that goes...
That would be the maverick then. Thanks.
If you have a newer stereo you can just connect the blue wire which is the remote to the amp and it will come on when the ignition is on. If not...
My starter teeth broke or maybe the flywheel teeth, wont know until this afternoon. As stupid as this sounds, how do I know what starter to buy? I...
Yes it is. That's what makes this forum better than any other. You sometimes need humor after a long day of knuckle bashing and getting angry at...
LMAO!!!:2thumbs: QUOTE=OLD GOOSE;838333]I also like having heating pads under my air gap manifold to help with the horsepower and I wrap my...
You can purchase an adapter at oreillys or autozone. There little plastic adapters. I think the 4v will fit on the 2v without an the adapter.
Im not 100% sure if a 90* will fit directly on the 2150, but with the right adapter anything is possible. Probably would be best to take some...
Spectra and K&N make some pretty good kits. I've never used one before, but they seem very easy to install. Here is a spectra dual cold air intake...
Separate names with a comma.
