I used it and turned it into my oil pump primer.
Thanks for your help I appreciate it!
Once it dies it will start backup and I can drive it again, but after 3-4 times of it shutting off, it will crank backup, but if I barely press...
I will have to wait until a friend of mine can come with his truck to drive it again. Once I take it on the road it never makes it home on its own.
I want to make sure I understand the timing thing. I want to line my balencer to the 0 mark, which would mean number one piston is at TDC. Install...
I havent drove it with the fuel gauge on and the fuel gauge is under the hood. I will rev it when I get home and let you know what it says around...
Ok Im trying to figure out this MSD distributor setup. I know that it came with 2 heavy silver springs and a blue advanced stop bushing which...
Well back to the drawing boards. I called MSD and they said that the MSD 5520 street fire will work with my 8479 distributor and have no problems....
Heres the difference in the2 MSD-5520 Voltage Output to Coil 435, Spark Output (millijoules)95 Millijoules, Minimum Operating Voltage...
Ive checked the modulator hose and blocked it off before. Same thing will happen. I get about 20hg with a vacuum tester at idle. Yes theres 12volt...
Its a Motorcraft 2150 2v and the engine is a 79 302 5.0 pretty much all stock except its bored 030 over. Will it show that high on the harmonic...
Ok I've been having the same issue with my vacuum advance. I did everything that everyone told me to do and still in the same spot. I checked for...
You want to make sure its cooled down before you try to remove it. If you do it right away the metal will still be soft and will twist off like it...
Yeah, I spent about $500.00 on getting my inline 6 head redone. Everything brand new on it and and converted to unleaded gas.
The brush on is a lot better than the spray can stuff. You can get a gallon for $40-$70 depending on what brand you get. I put it On pretty thick...
Not trying to step on anyones toes here, but doesnt heating metal make it expand?
Squirt the bolts with PB Blaster and then take a pair of needle nose vise grips and remove them like you would with a socket wrench. Clip it on...
Why dont you go with the airplane paint remover? You brush it on and the paint falls off. Theres barely any sanding involved, just be sure not to...
I have a brand new tank, new sending unit, new fuel filter, new fuel pump, remanufactured carb. I've sprayed around the carb no leaks, plugged...
Im running regular unleaded. I will test the air fuel mixture again. It seems no matter how far out or in it runs the same it nevers slows down or...
Separate names with a comma.
