I did a little of all 3.... turned the shaft 1/2 turn toward the front, 1/8 shim in front hole, and drilled holes 1/8" rearward of a plumb line...
Welcome from Portland, OR. This is the place for all things Maverick. Many google searches bring you back here.....because even google knows where...
Welcome from Portland, OR.
I bought mine for 500. had a 302, no tranny, rusty gas tank and trunk, no front seat, small bumpers laying in the interior......but the cowl was...
While I admire those with fabrication skills and experience that allows them to set a car up well, I have little. But, I have noticed that a stock...
A long, long time ago in a junkyard far away, I saw an inline 6 in a pinto. The back two cylinders were under the dash. I was horrified by the...
Does that require welding? Man, thats gonna mess up some powdercoat.
Welcome from Portland OR.
the third summer I had less cash to use, but I did rebuild, adjust, and instal a good holley 600 vac secondary carb and it finally works. Point...
Welcome from Portland, OR. Good job getting that thing running again. This is my first "old" car since the days of owning a 60s/70s when they were...
Well, I got it pumped to 18 psi, and am embarrassed and relieved to find the upper hose connection to the radiator was not tight enough...I used a...
Well, after R&R of heater core, I had to add more water. Nothing strange there. Short time later, another half quart. Still not strange. But after...
I am going to get that pump and pressurize the system to see what I see. I put a new heater core in, but I will check under the rug anyway, cuz...
It looks like autozone does loan that tool. If I pumped up the system as is, and positioned the engine so that #1 and #5 intake valves were both...
Does a pressure tester merely pressurize the system with air....like say, a radiator hose with a valve stem? I will google it. The exhaust smells...
I have had trouble keeping water in my car since the start. Used to push out the overflow until I put on a lower hose that didnt collapse and a...
Are you going to use headers? heheheh.....you will encounter a bit of heartburn if you want column shift.
I bought a c4 out of a Granada that had a 250. I used the torque converter, and purchased a 164 tooth 302 flexplate as the donor car (1980) had a...
I used a Saginaw pump and bracket from a 78 or 79 ford van. I think it had a 351 in it. It was kind of a funky, heavy bracket. I made a shim out...
That is great to compete with something you built yourself. Looks well done, and I bet it leaves a smile on your face.
Separate names with a comma.
