If time is a factor, and that 289 is in worse shape than your six, you might put the six back in for a bit. The v-8 swap is not exotic, but if...
Welcome, from Portland OR. Lots to learn....this is my first Ford that is not an inline 4.9. Tons of info in here....you can browse for days and...
I am relatively new to this stuff and have little experience. I have an iron head 302 with 1968 2v heads. I have read this thread with interest in...
welcome back. dont overlook an add in the parts wanted thread.
Welcome from Portland OR. Nice car!
Well, sounds like a good turn of events.....24K is quite the electric post too.
I have a ford 3 core radiator, and the fan barely fit in my car with shaving the shroud, I think on all four sides. I also moved the radiator to...
Hello from Portland,OR. Say hello to that husband of yours...he must be on a mission.....and the suspense builds! Hey Frank!! (I know you are in...
Double post....I dont know how to delete.
I got to test drive with kickdown rod in place. It is currently adjusted to be at the end of its travel when the primary is fully opened (vac...
I think I set mine at .042. When I switched from points to point triggered TFI, I noticed my engine ran smoother, the exhaust seemed less noxious,...
If you want to keep a points distributor, I think the GM 4 pin module or the ford TFI remote mounted module will work. Google "Go fast for less".
Well, I admit I dont have a clue how it actually works or where it should be set, currently the rod is set to be at full travel when the...
Installed a C4 kickdown that I took from a 72 econoline with a 302 & c4 at P&P. A few bends, a fabricated extension, 3 good looks at the holley...
Welcome from Portland, OR.
I have moog 8088 springs with a 302 & iron heads. Mine sits a tiny bit lower in front. If I ever graduate to aluminum heads, or move the battery,...
lol.....nice find.
I replaced every part in my front end that could possibly be worn. I insisted on doing my own alignment....so I had it wrong after three tries....
If spraying water onto the radiator cools it right down, then I imagine anything that increases the radiators task of shedding heat would help. I...
That thing looks new!
Separate names with a comma.
