I want to know if I could clean out the engine gunk by removing the valve covers and flushing the engine with a cleaner? What cleaner would...
I replaced my fuel filter to see if that would fix my hesitation… and I ended up having to put in a larger fuel filter, because I broke off the...
I’m sort of in the same condition…. Except its -37C… my battery is weak…. And my solenoid clicks… trying to start 10w30… I’ve got a new battery,...
I found a little Rabbit to turn into the bio-fuel machine…
It was just an idea…. There’s no way I would actually want to do it…. I wanted to know if it were possible… Is it possible to just have the...
I want to change the motor to a diesel so I can run organic fuel in the Maverick… The car will mainly be a show car for a friends company. It...
Is it possible to change the mav to a diesel? What’s the largest diesel engine I could fit under the hood?
It works… but a lot of force is required for the lights to brighten… so this switch is on the pedal where a wire connects to it? Is there an...
My break lights don’t work until I punch the break pedal down to the floor… how do I adjust this?
I’ve got that same problem… and I just cant figure it out either…my plugs and wires are good too…. I just cleaned the carb… and changed my fuel...
I’ve just noticed my new rear leafs are rusting… what can I do to fix this? I was going to go back to my spring shop and tell them what paint to...
I have to replace the spring insulator… so I think I’ll replace both top and bottom control arms… when I replace the spring insulator some one...
Actually I have the lower ball joint for my Maverick… and I think it can be replaced with out replacing the entire control arm assembly. I just...
I need to know if I can remove the lower ball joint in my Maverick, without the spring coming out? From all the diagrams I’ve looked at, its...
I have a stock Carb… I know it’s a MotorCraft 2 barrel… what would you recommend for a new 2 barrel carb? And if I were to take the air horn off,...
What happens when aluminum slivers are introduced into the carburetor? These slivers are in the area where the fuel filter attaches to the...
So the price justifies the usage one can receive from platinum plugs… Interesting results :clap:
The point where the pitman arm is connected to the power steering control valve has too much play... it looks like the bushings are worn away…...
I’ve been under the car… and me thinks it’s the power steering control valve…as well as the idler arm.. and I think one of my tie rods are bent a...
There’s a significant amount of a raise in the rear end… about a foot difference… can I counter balance a little with weight in the trunk? I need...
Separate names with a comma.
