just measure mine. 25.25 on the drivers side 26.25 on the passenger side. 6cly springs, battery in trunk(passengerside) and small bumper on...
I finally got around to cutting them today. I cut one coil and it dropped it about 2 inches.
I figured they werent that good. I measured about an inch drop in the front with them and it needs another inch on top of that. They did help my...
On a side note the Maverick finially made it to the local car show. It was the only one there. It almost didnt make it today because I broke a...
Thanks for the replys. I know I should get new springs but my leafs are flat. I like the height of the rear. The front looks like it has no...
I want to cut my springs to lower the front end. I was wondering if the spring will stay seated when the car is lifted off the ground. Thanks Chad
Thanks for the help. My fenders are different. They have an extinsion at the bottom of the fender that is held in with 3 screws. They are in...
I'm getting ready to install small bumpers. Why do the fenders need notched? Is it for the bumper or the lower valence. I made a template when...
I do it one of two ways. first add fluid, lift front wheels off ground and turn the wheels back and fourth, keep adding till full. The other way...
From what I know mustang 5.0's 87-93 have 9.0 with 63-64 cc heads. I dont know about the explorer 5.0 but should be close. I have a stock 87 5.0...
Can someone measure how deep the front sump of there 302 oil pan is? I went to get a new pick up screen but didnt know which one to get. I have...
Thanks I guess I got it confused with my 91 351w crown vic.
I dont have my car here with me. Does a 75 I6 have a return fuel line? It seems like I saw 2 but that was along time ago. I did almost get...
'92-3 plymouth laser (eclipse, talon, etc. As long as it is the body style of the 92-93 you should be fine.
I installed the eclipse seats after Ray posted it. It was an easy install. I used the eclipse seat rails. I had to shimm the passenger side...
MavMark How hard was the dash to put in? Do you have a write up on how to put it in? What is the center console(sp) out of? Thanks
I think Lokar makes a tv cable. You could also use a cable from a 88-91ish crown vic. It is important that the tv pressure is correct or the...
I have one of those 86 motors with flat top pistons and no valve reliefs. I picked a cam with .543 and .568 lift so I have to change or fly cut...
I have a newer model toploader from an 81 capri. It uses the cable set up. I have the cable and pedals in but havent installed the tranny or...
I have a 75 2 door and want to replace the hood. I found one in a junk yard. I looked at the car but dont know the year but it has 4 lug wheels....
Separate names with a comma.
