This one has me stumped. My idle is really rough and lopes, but smooths out at higher speed. Vacuum reads 10-12. If I pull of the hose that goes...
I've got this 250cc and I want to start with headers as my first upgrade. Problem is that I can't find if that will limit my options later. If I...
Fixed! Just wanted to follow up to say thanks and that the fluid/filter swap went well. The only thing I had to stop and look up was a spring and...
If the speedo is to be believed, about 90k.
Cool thanks. It looks pretty simple to do, at least from the article below. Any other tips?...
I just got my 76 started again after sitting for two years and the tranny won't untrack in any gear. It starts to move just a bit when I get the...
Thx guys! :2thumbs:
I got aggressive with my speedo cable and the metal inner cable came out of it a foot or so. Is there anything special I need to do to get it...
I've got to work up to that. Right now, I can only seem to melt things. :burnout:
Here's what I came up with. I liked Bigdan56's idea, but I'm no welder, so I took a bit of brass tube and a roll pin and it came out nicely. The...
Thx for the options guys. I think I'm gonna go with the autozone/help section knob. Cheers!
I think that would work in a pinch, but there's no gap for the washer to function. :(
I've got a delay setup but the post that the knob goes on is too short. I'm not sure what to do to make this work. I found a post from a few years...
So this 72ish mav with a v8 showed up. What should I get off of it? I got the speedo cluster and throttle cable already. The motor is still in it...
Looks like one is specific to the 72-77 Lux Decor Option. I think if you didn't have the tar paper template, you could still get away with two...
Thanks! Mine was pretty bad too. In some cases, I had to guess where the slots would be where it hung on the hooks. I need to get a pic of it from...
I'm rebuilding my interior and I've put in the peel & stick for the floorboard, but I couldn't find any techniques people have used for the space...
Excellent Thx!
Joe, I think reskinning is the route I'm going to take. Is there anything I should know beyond what's in the tech article? Any reason I couldn't...
Thanks guys. I will have to ponder this a while. I just don't want it to look like '#2'
Separate names with a comma.
