Check for a bent valve. If that valve appears shorter than the rest, that is what it is. We ran into this same scenario(loose lash) on a buddies...
I believe 1M and 1MA is 289, as 2M and 2MA is 302.
What I have found on mine, is that small chunks of rust will be stuck to the gasket. Once the cap is taken off then put back on, it always leaks....
The dipstick tube is just pushed into the tranny. There should be a bracket welded to the tube that has one of the bellhousing bolts going through...
I think it might be C2OW, it is the early one with only horizontal ribs, not the later "waffle type".
I have run my plugs at .030 gap in my points distributor in my '72 for years and never had a problem with popping up to 6000-6500 rpm. I have...
I have always used a long 1/2" breaker bar with a deep well socket. With the breaker bar, the angle of the bar to the socket is not fixed at 90...
I believe the mustang II wheels are 4-1/4 vs. the mavs 4-1/2 bolt centers.
All mine from the factory were the same length(just not sure what length they are).
Pretty sure they are 7/16-14(coarse). Not sure on the length.
It was just a plug to keep fluid from leaking out on assembly line. Toss it.
If you ground the wire/wires on the sender and it still will not work, it is probably the voltage regulator on the back of the instrument cluster....
Advance Auto, through Partsamerica.com, GP Sorensen # DS176 $57.48. Auto Zone- Wells # SW1013 $43.99.
6110 will fit with column shift. The drop bracket is needed with power steering.
Yes, the flexplate bolts will leak without sealer.
Anybody keeping track of Don on dragracecentral.com? He was runner-up in sportsman race of champions. He won first round of sportsman(all that is...
Hope you do better than I did this past weekend at the div. 4 bracket finals. I lost first round of race of champions with a .015 package(well not...
Factory adjustments are 1-3/4 turns out from snug on the front, 3 turns out from snug on the rear. I usually set mine at 1 turn front, 2-1/2 turns...
When you are in manual low, and let off the gas, does the tranny freewheel? If it does, the rear band and or servo may be the problem.
But I didn't get one on your latest post after mine.:huh:
Separate names with a comma.
