185-75-14 on 6" wheels on the front and 235-60-14 on 7" wheels on the rear of my '72 2dr. 185-75-14 on stock 4.5" on the front and 205-75-14 on...
That is the way I feel also. I have a big bumper 4 dr. and a small bumper 2 dr.
Congrats, way to go!
Is that a chrome water outlet? They are notorious for warping and leaking. If the surfaces are somewhat flat, it shouldn't leak by just being...
If you are asking me, then yes. I have won three gold and two pewter ones with my '75 four door. I also won one pewter one with my '72 two door.
I don't know if this four race series is the same as it has been for the last several years in division 4, but if it is you will get a gold wally....
In order to get the driver side on, I have to unbolt the shifter linkage pivot (two nuts from underneath by the steering box) from the frame. Then...
If I were going with Crower, I would use the first one. With the tight 108 lobe center and the duration at .050, it should sound pretty good and...
No, unless someone has put a bolt in the end of the shaft. The shaft is threaded so a stud can be inserted with a bearing/washer and nut to draw...
I have them on my '72 with factory column shift and they fit great. These headers were bought in '87(well before Holley bought out Hooker) so I am...
I have separated the front hub from the drum by driving the studs out. The front studs have extra long shanks that protrude to the outer edge of...
Congratulations! Keep up the good work.
The first thing I would check would be the fuel filter.
If this 302 has stock rod bolts, I don't see how they would make 50-55ft-lbs. without breaking/stripping. They are 5/16" and torque to a max of 25...
18-1/8 to 1/4 top to bottom 19-1/4 to 3/8 side to side. It mounts to the car with U nuts like the radiator uses.
From the symtoms you describe, it seems you have narrowed it down to the carb secondaries. If it was a timing problem, you would have bad running...
The brass floats are available at ford dealerships.
You did remember to put the little pin (in the picture of your old modulator) in the new modulator didn't you?
Hooker supercomps p/n 6110 will fit with a column shifter.
My '74 parts car had a 15 gallon, same as '71-'73. '74 was the first year of the big bumpers so I assume they might have had the bigger tanks...
Separate names with a comma.
