It's the connection at the pitman arm that gives that feel. If you wanted to change the feel significantly you 'd have to go rack and pinion or a...
MY Comet is under construction to be a daily driver/road course race car. 90% of the mechanical is done. 0% of the body work. I make 'em run...
That's an exhaust crossover. you don't need it.
You should always run some form of active crankcase vent. Your rings will last longer!!!! Gulupo I would say in my professional opinion: You got...
I can't believe I just read all of that. I can't afford $0.02.
I modded my old bracket too. and I use an Edelbrock. It's simple drilling. The intake came with a spare plate that made it easy.
Got the same deal as Derek except hooker headers and I did cut the brace for proper drive shaft angle. Works excellent. I used a Hydraulic set up...
will do. Thanks. I have only heard good about them that's why I ordered from them. Hope it's something minor because I need a lot more parts...
I been having a hard time with CJ pony parts. I ordered spring perches and I haven't got anything. It's been awhile since my orig order. I called...
Put an evaporator in place of the heater core. To hell with the heater!! It don't get cold in the south.
Voltage is the same. Most Compressors use a diode somewhere between the hot and ground wires on the compressor to limit the AC current that the...
Check the motor/trans mounts that can cause the sudden reverse action. Had a 68 F100 run thru a shop door because of that. vac lines and gas in...
I read a real bad review of one-wire alts. Said they have poor efficiency and don't charge well at slow RPMS. Also said slow to react to varying...
Where I usually start is the Idle mixture. Turn all the way in (don't tighten) turn 2.5 turns out. Start car and warm it up. Set idle speed with...
There's not much else under the hood that needs switched power other than the electric choke. Its not that is it? If it doesn't run a gauge or an...
I don't know what the torque rating is on the 3 gear but, I have done some terrible things to one and it held up just fine. The problem with the...
T5's and AODs can easily eat up a lot of your budget. Of course that depends on whats available. the c4 can get it done but it has no overdrive. A...
Most of the people on here, I've noticed like to go the cheaper route. Something about bills and such. Don't get me wrong, New stuff is REAL nice....
:Welcome: When you get back take a drive thru west Texas. Every now and then you'll find some cool stuff in fields. Just the other day I saw a...
It should still eventually shift to 3rd if it was the kickdown. Sounds like your not getting fluid into the proper channel to apply 3rd gear....
Separate names with a comma.
