Thermostat is in correctly. One question, When they talk about the rotation of the motor or water pump and they say: Clockwise or counter...
Just a habit so I don't forget. Is there a way to check the flow of the water pump? I'm trying to eliminate all the possibilities/ Process of...
I'll check for the head gaskets. I had an aftermarket temp gauge that included amp gauge and oil pressure gauge. I installed another temp gauge to...
The temp gauge was new but I replaced it anyway and it still showed hot, As far as the new motor, I purchased a long block where the heads were...
I've heard of the wrong rotation water pump. The only one I found that rotated in the opposite direction wouldn't line up with the bolt holes...
I'm going to check all those today. The timing may be off because in the short time I've ran it after break in, It's not running right for sure.
Not yet. I hadn't let it get to that point. I just got duals on it and got about 2-3 miles from the muffler shop and saw the temp gauge was pegged...
I've tried everything I can think of and cannot resolve the overheating issue on my 73 Mav 302. New motor, new 3 core aluminum radiator, new water...
I have an electric fan on my 73 Maverick and I'm wanting to install the manual fan back on it. I'm in need of a shroud. It came with factory air....
Well necessity is the mother of inventions. I fabricated a pivot stud bracket and it shifts fine now from the column. And I did it all without a lift.
Yeah I noticed the right side header is pointed sorta straight to the floorboard. I'm gonna angle the reducer down a bit off the header and...
Good to know. Thanks.
As you can see, there is no pivot stud stabilizing the shifter arm. It should not be difficult to fabricate a bracket to work. Just need to get it...
Thanks
Is there any way your friend can fabricate one for me? I'm having the same problem with mine. The new block I installed did not have the boss to...
Does anyone have a photo of the automatic floor shifter linkage for a 70s Grabber? Want to make sure I have the correct one.
Yeah, I'm going to need to locate that bracket or like you said, fabricate one. I picked up a Maverick floor shift yesterday which looks like...
Do you have one? Or where can I get one? Do you have a photo of what it looks like or mounted? The person that removed the old motor failed to...
I found out why I can't find park or neutral. I'm missing the bracket that stabilizes the shifter arm and the linkage. I have two. One on each...
Got some ordered. Thanks. For some reason I cant locate Park or Neutral so I can't break in the new motor. Is there a diagram showing what all is...
Separate names with a comma.
