I just put on 4 new monroe shocks a while back. They def ride better than the old worn out ones, but the KYB's were quite a bit more expensive.
I can tell its a cool color from the pictures even though I see what you're saying about the pink. Would love to see that in person.
ROFL. I can identify with that...
I have a 302 in mine with 2.79 gears and it gets ~20 city/25 highway. And it still has a decent amount of pickup. Probably gonna pick up some...
Mine isn't finished, but I'm getting a lot closer. And I would drive it daily if I didnt drive like 100+ miles a day for work. I've got a 306 out...
If you can swing it get an AOD out of an old police interceptor, or any trans with OD It will help balance out a higher gear.
Could this have originated from a stuck valve? And fwiw. I hydrolocked my motor while it was running recently with a fairly decent volume of water...
Dang those rockers look really expensive (I mean err, nice) LOL...
Sorry it's so long: Cracked Piston Detonation is the most likely cause of a cracked or broken piston. The hammer-like blows of detonation can...
You know now that I'm thinking about it I read something the other day about timing being too advanced and firing before the piston reaches TDC,...
I think I've had my engine in and out 4x for different issues. Had to put in a new transmission, take the heads off and put new push rods and...
First time out with my motor I threw a push rod. Found it in the back of the intake. Bent three others and blew a lifter. Kinda sucked cause I had...
Honestly they look like they've been in there forever. But the mounts look good. And I replaced them with standard shocks
Thanks they're not original. Most of the bolts on the car aren't lol
OK. I'll give that a try..
Thanks I'll give that a shot. Can I use anything on those to keep them from backing out again so easy, like locktite ?
So while I was putting my shocks in I noticed one of my engine mount bolts that goes into the block had backed out about 3/4 of the way. So I went...
Figured out the problem. You either have to remove the bolts before you jack the car up or take out the back one first if its already in the air....
Yeah I have the car jacked up and weight off the spring and the control arm and it looks like its blocking the rear shock bolt because there's no...
Thanks :)
Separate names with a comma.
