Yea, started removing the belly bar. One bolt came out fairly well, the passenger side is being stubborn. Sprayed that also. Thanks for the info
Thanks Craig, that worked fine. Now I'm just having a fun time removing the lower ball joints/control arm. The bolts are a BI-ATCH! Sprayed...
Thanks, will try that tomorrow after work :thumbsup:
Would ya'll suggest removing the sway bar end links to aid in removal of the spindle? There seems to be a lot of tension in just trying to...
In the process of drum to disc swap. What has been the cleanest/easiest way you bled out the brake lines? Just let them drain out?
Went for a test drive after tuning 750 carb. Rode fine. Am contemplating starting disc brake project:hmmm:
Found 'em guys, thanks:thumbsup:
So what would be the primary/secondary metering jets shown on the schematic? Thanks
Was taking apart my edelbrock 750 for rebuild. Boy it was pretty nasty inside! Well for the life of me I can't find any jets! Scrubbed, cleaned...
Found out the carb I bought a while back on "sleeze"-bay wasn't a 600 cfm Edelbrock after all. After checking the casing # to purchase the proper...
Does look like a dirty carb. Took it out again after checking it over and spraying what I could with carb cleaner and it still bogs pretty bad on...
Duraspark/Edelbrock 600
Gonna screw it back tomorrow. Had too many :drink: this evening. Also gonna check every thing else out, plugs, wires, cap, etc., Thanks for the...
Took the car out for a drive today. Hadn't been started for about 3 wks. After letting it get to operating temp, drove off. Seems like the...
Put a crate 85 Mustang in mine. Had to purchase a 50 oz balancer.
Don't know if this has been posted b4: I have the '75 w/the catalytic hump. I currently have after market buckets in place. The problem is I...
....also declined a trade offer for a 1963 Falcon
Repacked bearings, cleaned/adjusted ebrake cable. Tomorrow-oil change:2thumbs:
Looking to replace front end suspension bushing. Do I have to only get specific Maverick bushings? or is there other kits, etc., I can use. Thanks
Had the same problem with my Holley 600. No leaks but couldn't figure out why the bowls we're filling. After taking it apart/putting it together...
Separate names with a comma.
