have you tried on a different computer so you can rule out your laptop from being the problem? what operating system are you using on your laptop?...
some people are sentimental about their cars... dont tell them your plans, just tell them you will drive it the way it is for now and have plans...
all you have to do is click on the paper clip icon (once you click reply or new thread) and a box will appear then you can browse your pics you...
I called ford racing just to be sure about the specs and Starsky74 is right on with that... they also indicated that the torque to yield bolts...
yeah I think you're right>> i should just go with regular head bolts...one of the tech guys at ford racing said to go with them ...not sure why, i...
Hey Great Nice reading... I guess my next question is... Anyone know what the torque specs and procedures are when using the torque to yield bolts...
What are the torque specs if I use these bolts? do I torque to factory specs?
I just turned 2 !! :party4:
I'm not sure if you can put the gasket on backwards... What the tech was referring to is that the older blocks (ie...1971)have the steam holes...
Yeah he also referred to horsepower as "Horsepressure" :hmmm: lol
that was some good reading
I like the way this one sounds a little better>>> [media] LOL :thumbs2:
Spoke with Ford Racing about a camshaft for my 302... they referred me to a place called Runne-Rite research with some cam specs to give this guy....
I just called ford racing tech again ( im a pita sometimes) and he said I should drill these holes in the head...the holes are already in the block!!
There is a reply from a guy stating the holes do not need to be drilled...What is the story here? should they be drilled or not? anybody have the...
I just got off the phone with Ford Racing Tech... I just found out that I need to check my block for proper cooling if I am going to use the GT40...
I think I am going for this cam... http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=790&sb=2 it will give me a .463 lift with the 1.7 ratio...
Ok I'll take a look at the edlbrock, any others that might work? Keep in mind I have to keep the lift under 500 WITH the 1.7 ratio rockers... Thanks
Ok I just picked up my GT40 Heads and 1.7 ratio cobra rockers.... now I need to select a cam... the springs on the heads are rated for a max lift...
there is a spark plug on the market that fires in oil. I used one on an old chevy that used to foul quite often...same symptoms you described. Not...
Separate names with a comma.
