i have a 600 Holley that is a spread bore.. To run the spacer to make it work on a square bore intake, the breather hits the hood.. Have no desire...
Still working on her..
I rebuilt the 600cfm I got and set the floats at 5/16.. I could rebuild the 500, but when I took the top off of it there was a 1/2 inch of crud in...
idling it is fine.. idling in gear is when it loads up alittle.. I guess I could tweak on the carb in attempt to line it out.. What I mean by all...
I have a 600cfm on my 306 in my 72 Maverick.. She is alittle rich when in gear at a stop ( loads up alittle bit ).. From all I read a 500cfm is...
Thanks for the info..
It really doesn't matter.. As far as buying 1 to match it, I don't believe I said I was buying 1 to match it.. I have a 302 that I built in the...
I have tore down the 302 that I pulled out of my 72 Maverick.. I do know it's a 74 block that is 40 over, and the heads are 72 58cc heads.. The...
The plunger on the ignition switch was sticking so I greased it up good.. And works great now.. Went ahead and ordered another 1, figured I may...
You guy's sure do come up with some great ideas on how to find and fix problems... Thanks again..
That's a pretty good idea.. Is there 1 lube better than another??
I know it's not a fuel problem.. I have changed the celenoid.. Going through the process of elimination, I would say it is either in the...
I finally got it running, but at idle it would run anywhere from 30 seconds to 5 minutes and the car would just die like you shut the key off.. I...
Do u half to pull the steering wheel to get the ignition switch off?
Was gonna start with celenoid hoping that would be it.. But had a not so fresh feeling it would be the ignition switch..
My 72 was running fine.. Then out of know where it would be running and die.. U can turn the key on to engage the starter and it will run. As...
I figured as much... Thanks again..
I have successfully found a set of factory maverick bucket seats.. But unfortunately they don't have the rails with them.. What is the closest...
I have the shorty headers, and I am looking to do the exhaust myself.. I have seen Mustang H-pipe skits designed for the short header. Was...
Thanks 4 all the help..
Separate names with a comma.
