That's the one. I was afraid that was what I was going to hear.
Allright, a die grinder bit in my router got the old one out just fine, but the new one will only go in about 1/2 ways. I am afraid that I am...
I picked up a new idler arm bushing, since mine was shot. Well, everything was going well until the outer part of the bushing is stuck in the...
Lol, well like I said it was a long shot. But in my experience with wrenching I have learned to check over the most very obvious things first....
I have had a couple of RV style of cams before and they did improve performance, but the pleasant side benefit was that under normal driving...
Thanks for all the input guys. I would like to put a mild cam in, but exhaust will come first. Gotta get the beast breathing and getting things...
LOL, well that's just BS that they require you to license a car that you cannot even drive atm. What about timing? I know that is a fairly long...
Usually too low of amperage is what makes a solenoid stick. Or the bendix on the starter can stick too.
It is snowing like crazy here too, has been all day. It sucks, I have been looking at snow since the end of November. I am starting to think...
If they dropped the compression down a full point, that probably had to do with unleaded gas coming on the scene?
I read the original post before you edited it, and yes, if the smog lines are sucking air, it could possibly be causing your engine to die once it...
I went to the pawn shop and picked up both gauges and the torch with all the cutting and welding tips for $85. A $20 set of hoses off from Ebay...
Sorry to hear about your grill man. I was working on my hood for the better part of the day getting a couple of dents smoothed out. Well,...
Yep, $300, that sounds about right. It might be a bit cheaper if they can still use the one side that already runs part of the single system...
I have had a lot of old fords that had the cooler on them. I think that it helped to keep the Ford ps wine down a bit. I have also had a couple...
With the shock tower braces, couldn't a person just fabricate a brace out of bars to get around the fuel injection intake? I know that it...
Check and make sure that the linkage to the clutch is not pinching a vacuum line either next to the manifold, or under the car where it pushes on...
Well after reading in a couple of different books and seeing the HP ratings for the 302 Mavericks, I noticed that the 72 Maverick only had 140hp,...
Yeah, with the brakes the front was nose diving really bad and amplifying the front end being a little sloppy from the idler arm being bad. I...
Frank, thanks for pointing that out. It would be the one and only one on the left side then lol. The other one I guess would be the pitman arm....
Separate names with a comma.
