Why not just put a new posi in the 8" you have now?...A lot easier
Misalignment or the wrong starter can cause this....I'm sure somebody will chime in that knows the different starters than i do
O'brien Truckers?....He seems to have the market cornered on those
Anything more than a 2" block in the rear and you have to be concerned with driveshaft to floor contact towards the rear
Mine's a '72 and it has the door bars and those doors are heavy!
Black goes with any color interior...Dark green would be good
No, it means the bendix gear in the starter isn't being kicked into the flywheel so the starter motor itself is spinning without being engaged...
Sagging mostly happens when the floors and inner rockers rot out, 99% of the time in convertibles because the absence of a roof
Sounds like the starter motor is spinning but the drive gear isn't engaging the flywheel
I'm a long time custom painter by trade and you really don't want to do this...Save the rattlecan stuff for little odds and ends in your house or...
I've used DAS also and was happy......
Pull the plug wires off one at a time while it's running, looking for the one that doesn't lower the rpm at all when it's off..Use insulated...
Anything with a T5 and i'm in......:2thumbs:
Just go back from a cruise morning down near the water on the south shore of Long Island....Probably about 3-400 cars....They meet there every...
Ford quality control.....
Not really my favorite but the only one i remember in a Ford.....One of the older guys had a Flathead '50 Ford....I was probably 16....4 of us cut...
You can put limiting cables around the rear so it doesn't drop so far....The original Shelby GT-350's had these but they where more for preventing...
I've also tapered the end of a bolt on a bench grinder for those hard to start bolts...Kind of self centers it as you start threading it
One side is 12 volts from the ignition switch, the other side goes to positive side of coil..It should be a somewhat thick wire....Resistors will...
I no longer have side marker lights so i guess no:)
Separate names with a comma.
