Have the same set up but had to get a Willwood master in order to get enough throw on the slave
Had to massage the driveshaft tunnel upwards with a decent sized hammer...Driveshaft would occasionally touch towards the rear on heavy duty dips...
1- 1972 Maverick
Do a compression a leakdown test
The angle on that ramp looks mighty steep...Should be at least twice as long
The guy i sold my old mustang to had an idling problem, Holley 700 dbl. pumper...Decided not to mess with it and bought a brand new...
Thanks....I once was given a ride around Sears Point by Steve Saleen in one of his Mustangs, that was before the track was changed....Would love...
There's flex in your bushings and shackles and probably the springs themselves, especially when pushed hard
I studied the photos on this page and essentially built the same for my Maverick......I didn't document the whole build with photo's but if you...
Here's my homeade watts link setup...No hard to do if you can weld....Concerning composite springs, isn't that what Corvettes have been using for...
Don't forget the seals on the end of the axles along with the bearings...A little tip..Before putting one axle back in, refill the gear oil by...
Don't see anything about 64 cc http://www.airflowresearch.com/index.php?cPath=21_23
...........
Cool, thanks guys.......
Found a set of AFR 165 heads with 10k miles on them locally....the guy wanted $850 and i got him down to $700.00......What are your thoughts about...
Separate names with a comma.
