Braided will more than likely be -3AN, same as brake line....Order it longer than you think you need or by the time you route it, you'll be...
I bought a brand new SC in '91....Pretty cool car...At that time i thought it had the best seats you could find in any car....Didn't know you...
Hood pins are going on.... I also moved the top of the grille forward about an inch....Just gives it a subtle little look
Made an aluminum filler panel between the grille and radiator support....I has quick release fasteners to remove [IMG]
Sent the hood and rear lower valance out to have some louvers punched in them
That's part of the ball stud....Threads into bellhousing...I've already milled the boss down probably 3/8"...Could go some more....Once i figure...
That's what i was thinking too but that can be worked out
Hydraulic pusher slave
What about just shortening the ball stud?
289/t5 swap....Using the bellhousing from a '90 5.0.....Cannot get it so bolt to the block....Seems there is an interference with the clutch fork...
Finished making a gauge panel [IMG]
I'm wondering if there would be clearance issues with some headers.....:hmmm:
The thing i noticed the most about the turbo T5 tranny was that 5th gear was a shorter gear than the V8 tranny, a true 5th gear as opposed to an...
I put a Turbo 5 spd. behind an EFI 302 in a Cobra years ago....Loved that tranny....Had better gear ratios than the v8 tranny.....Also had a...
Pulled the engine and painted the engine compartment
Have the cancer cut out and weld new metal in...Anything else and you're just stroking your buffalo
It's three separate pieces, one base or main part that holds the filter which is bolted to the carb where the normal wingnut threaded rod would...
It should be what did i do the last few days....Custom air box that took 2 1/2 days...Did the Shelby drop, stripped and painted the inner aprons...
This was on my car when i got it but don't know who makes it....I added the cross brace in the 2nd and 3rd pics [IMG] [IMG][IMG]
The spotwelds on the rain gutter are gonna have to be drilled about a foot and a half up into the roof towards the front of the car....This is to...
Separate names with a comma.
