Not sure where you got 46 from but the correct running count should be 2222
Do Not: randomly buy parts off eBay, normally they will be way over priced. It is much cheaper to buy them from members on here. When rebuilding...
Mine is fairly close to the water pump but i have around 1/2” clearance which is plenty. I cut off about 1/8” from the shroud to get a bit more...
I have heard only good things about their hoods. Also I know several people who have used the factory scoops with out issues? Honestly unless you...
I got a chance to run the radiator, with the black magic fan the car is kept very cool! The combo works great. [ATTACH]
Only one manufacturer of the grabber hoods. The steel hoods are fantastic quality and well worth the money.
So far I am very impressed with this radiator and It is well built.
I installed the radiator and it fit fine. You will still have to trim the support brace or redrill the holes. But that wasn’t a big deal for me as...
Just get one for a 60s or 70s mustang gas cap.
Got the fan all wired up. Man does that think work well! Simplified my wiring harness and got to enjoy the car for a. It.
[ATTACH]
You have to trim the upper shroud for the radiator hose and the bottom hose clears with out trimming. You do have to trim the shroud 1/4” total to...
I have an aftermarket pump (stock length snout) but it is standard rotation. You are also running a 3 core this is a 2 core. There is about 1/4”...
It was brand new, unfortunately when I got it the box was ripped in transport and the controller was missing. Amazon gave me some money off on it,...
I was able to get it fit! I am actually running a 2 core, but man was it a fight. I had to trim the shroud down about 1/4 of an inch then put back...
Had someone else have this issue. I told them to message Stefan.
Amazon had a mistake in their pricing and I got it for $60 instead of the $220 it normally retails for.
With radiator it’s approximate 6.5” thick the fan it’s self is 4” thick. It just barely fits into the engine bay and misses the pulleys. I mocked...
Separate names with a comma.
