With 4 Mavs and 2 Comets, go weigh one of em ya bum! Don't be so cheap.:D And stay away from the Lincolns. :D Ken
Should not go to a 12 volt supply for the following reason. The application of 12 volts starts the choke opening to early before the engine is...
Only thing left to take a look at is the proportion block. The block has specified ports for front and rear and can't be reversed or mixed....
Running out of places to go, except to say that on the proportion block, there are front and rear ports and cannot be reversed. I have the change...
Two things to look at. Is the master cylinder being operated far enough to make pressure, not going against a stop? The disc/drum system is...
100 mph in the quarte eh! I want a couple of them engines.
About the only benifit you will gain is more fade resistance. You better take a look at what you have. There not that bad when working properly.
How does one know how well Chris can weld? It may let go the first time he goes to the line, jambs up, breaks an axle,crosses the line and nails...
And don't forget the quick change rear end:D
I don't understand your finincal thinking. Till its all done, you will have much more money invested than going to a near bolt in assembly....
I've been through two roll bar issues on two cars like you Charlie. It often depends on how capable one is in doing some things. I mounted a...
Rick brings up a good point about the deep pan. Considering where you live, there are two ways to hook a cooler up. The stock hookup with the...
Don't know if I would do that. The flow volume may not be enough. Use a larger cooler designed for the use.
Sorry about calling it a 77. There are a number of valves and switches and a 3 way solinoid valve involved, controlling vacuum to the distributor....
Put a timing lite on the engine and watch the timing. Jazz the engine into the hesitation and see if the timing is going quite retarded. If so...
Just hook up the fuel line from the tank to the pump (off the engine ) and operate the lever by hand. If it is good, gas will come out the carb...
Firewall to spring tower braces for EFI installation: I used 1" sq. tubing with (formed) flat stock ends welded in to bolt down to the original...
The sector shaft seal is replacable. Remove the arm, pick the seal out without damaging the shaft surface. The seal, may be difficult to find. I...
T
On the search line type in 'pictures,300 six'
Separate names with a comma.