Rod, your the man! See how east it was. Good luck.
What flywheel did you put on? It must be the 157 tooth small wheel. Is the starter jammed up? Its work but need to look at these areas to find...
With a timing lite, check to see that the timing advances smoothly when the engine speed increased to at least 2500 rpm. If it jumps around there...
You could consider replacing the spindle / drum assembly with those from a 72 or possibaly check to see it 72 wheel cylinder would fit with its...
Its's still in that area. Look near the emergency brake tube just above bottom lip of dash. Unless some one removed it. Did you check the fuse?
I have fuel injection. The pump is from a 85-87 pick up truck. They are found mounted on the frame about under the drivers seat. My pump is...
Rod, the flasher is located under the dash to the left side of the steering column. It hangs off the wire harness attached to a socket. You...
My 6 pences! The inertia switch on the FI cars is there for libility causes as well as to prevent the feeding of a possible fire in event of a...
Hope you have a good reason to move there.
Yea, didn't you know that! Got to pull the insturment cluster out then any duct work in the way THEN maybe you can get to it. Good luck.
Here is a possible source for you brake hoses. Greens auto parts 800-565-1544. There are two hoses listed depending on the build date of the...
Tecno...are you up to the task of doing a conversion? Neither engine will be just a bolt in beyond the trans and motor mounts. These cars were...
The way you discribe your application of the clutch, you are burning it way more than you should. You have to get the Rpm up over 3000 and a...
Don't put diesel fuel on an engine in a car! Its no good for belts and will get all over the windshield , paint etc. use the proper degreaser...
The rear has been lowered 2" by placing spacer blocks between the axle housing and the springs. It is wise to go one size larger on the U bolts...
Theres no deal here. Use the shocks listed for the application in what ever brand you like. The term 'strut' has no meaning on a Mav or Comet....
You don't want to remove the starter solinoid or "no start motor"!! unless changing to some other starter that has the solinoid built in, then...
JC, how about starting over again and telling what you have for an engine, trans, and year. What you need for parts etc. I think everyone is now...
I'm not sure what you need but if its a v-grove waterpump, take a look at the pick up trucks to 85. They are all v belt equipped.
You should go back to those people and have them do the work if thats the case. Very few items will interchange. Comon items like door release...
Separate names with a comma.
