Where can you get replacement glass for front windshield and back?
Hi all, I am still in the middle of replacing my floor pans...taking forever, but just finished the 220 upgrade and got a new compressor to run...
Thanks for all of the replies guys. I've got a couple electricians coming out today tomorrow to big on putting 220 into the garage. If it's too...
Comet is running well... and I am sure I am doing things out of order, but I saved body work for last. As I am replacing floor pans, I am finding...
Yes. It will probably take me until the end of the month to finish... hard to get garage time. In the middle of a remodel of dining room. Slow...
Thanks!
What's a good cutter you would recommend? First time cutting and welding.
[ATTACH]
Jig saw and reciprocating saw seem to work well... Any risk of anything moving if I cut all of floor pan out in one shot or is doing it in...
Slow going... I bought a 3" aircat cutoff tool to take the old pans out but I don't think the compressor is strong enough to properly power it....
Good alternatives but mine is too far gone. Top cowl has to come off... curious to see if anyone has taken top cowl off with dash and engine...
I've never welded before so I've been putting it off. I took a one day welding workshop.... here goes nothing. [ATTACH]
I've got a cowl to repair as well. Has anyone done it with the motor and dash in place. I understand it would be much easier with them out of...
Well if anyone is aware of where you can find a centerlink for a 72 with power steering, let me know.
Moog no longer makes a center link for the Comet. Can't seem to find one anywhere. The pin holding in the control valve got shaved off. Will...
maybe they are not that bad...but since I am down here, figured I would fix if needed. I think the idler arm is good, but everything connect to...
I am repairing some leaks in the Power Steering...replacing some hoses. I noticed that the rubber on EVERYTHING between the Pittman arms from one...
Figured it all out. 1) Red wire connect to solenoid 2) Drilled a small hole in throttle solenoid bracket for transmission kick down spring 3)...
The existing ignition wire is resistive and will not give you 12v, but you can use it to trigger relay.
Separate names with a comma.
