G-Force t5, it's hard shifting from 5th into 4th unless I go to 3rd first then it goes into 4th easily. Don't even have to fully go into 3rd, can...
great reading material, gone through most of it .... so looks like I might benefit from exhaust temp sensor when I do my tuning, any...
awesome! love the video, thanks for taking care of that bry! sounds mean.
can I just control fuel flow with my MS3 for now and set it up for ignition control at a later time? So basically have it control the injectors...
I missed that...I guess the summit one just isn't fuel compatible. Wish I had seen this, probably would have been much easier to work with this....
this was a helpful site and some good reading .... http://www.bcbroncos.com/fuelefi.html
So I don't need a wiring harness with all the connectors? I can get the connectors separate? [IMG]
but you see, it doesn't mention that it's for fuel...at least I don't see it.
any thoughts on best source of engine harness? maybe an explorer? we were thinking of individual coils....megasquirt 3 should be able to handle...
wow. same exact thing happened to my engine...and I mean EXACT. All my valves bent after kissing, and it broke the edges of my lifters. Apparently...
awesome work, looks very unique
I wanted to make it the shop truck but the guys didn't think it was a good idea so it's become more of a personal project. it's great because I'm...
[IMG] I'm gonna let it rust some more....really digging the rust look... gotta strip the paint off the truck bed...
I like the side profile. . . gonna try to sit the truck as low as possible though....and use skid plates! :) [IMG] I guess this is an early...
the tech says that I overtightened the bolt. There is a "crush" washer apparently there and even turning it one extra turn will make the center...
removed the valve cover and re-adjusted the valves... this time it should be pretty dead on .... [IMG]
got the exhaust back on [IMG] [IMG]
putting the shock on wasn't too hard [IMG] [IMG] [IMG] [IMG] I installed the fuel pump but now it was hitting the shock .... so it took me...
practiced welding some thick metal to a piece of thinner metal and didn't get really good penetration on the thinner metal.... [IMG] [IMG] got...
I got to the shop pretty late today after work but got a lot done... started by cleaning the metal, grinding it and cleaning and I did the same...
Separate names with a comma.
