Or at least a rev limiter!
I used RAS pics to do my car and then made offset shackles like in the first pic posted by olerodder. I have a building in the projects section...
Whats going on with the old pieces?
Those look kinda like the headlights for a 38 ish chevy.
Duration of the cam?
I have one layin in the back of the mav,extra.
Mine sounds about this good [media]
On the shafts I have built on the end near the joint has just a freeze plug knocked into the end. Sometimes the don't seal well. Another thing I...
On the efi 5.0's just unpluging the back line to the egr will set a code 33 and the ecu will disable the egr system and use fuel and timing maps...
Call my brother in law (Mike) at Driveline Service of Fresno (559) 266-1673 and he can build you whatever size and shape shaft you want with...
I used to run toyo ra1 on my mustang. Very grippy when warm
Yep, maybe a Z rated 245/45 r17 or so as long as the wheel is light.
I cleaned up the sharp edges under the valve seats, removed the exhaust humps, 5 angle valve job an dshaved them 40 thou. Big diffence over the E7's.
Have Bryant be the co-pilot
There is a complete though rusty on Sacramento Craigslist for 550
Someone brought down the Ban hammer!
As far as I can remember, I will tear it down in a week or 2 and see where I am at with it.
You either don't have the converter seated all the way or when I ordered a TCI 3500 stall it was a 1/4 inch to "tall". I finally returned it and...
No, he has Effie.
I tested with 25 psi and heard leakage on everything
Separate names with a comma.
