The difference in height is probably from the lash caps he has on the valves. I have converted a few with hardened washers and aircraft nuts, if...
I regularly buy them for 70 for the pair of spindles and don't tell them the caliber brackets are separate.
They sound like lift shackles and they are to lift the rear of the car to make up for sagging springs or just for looks.
I made the shackles It's been a while but today I got the rad installed along with the trans cooler and elec fan, now I just need to do some...
One has a forged steel crank and higher comp.ratio. The other is a cast crank. The forged is better but it depends on what your doing with the car
I actually had an old electric fuel pump and a separate reservoir full of soapy water on my 71 nova,people used to wonder how I spin 295/50r15's...
I prefer to let the tires be the weak link. Keep replacing broken parts until you get back to the tires.
Sounds like a plug wire is on wrong or an intake valve is not closing. Are you using the 351/302 h.o order or the standard 302. I have used the...
I noticed the throw being shorter with my hurst shifter. The biggest difference is not having the rubber bushing on the shifter handle,make it...
I used a Russell steel braided line in the rear of mine,bout 17 bucks total.
Check the accelerator pump.
I have had the peel and seal in my car almost 2 years in 100+ weather,parked in the sun and I have no smell and it is staying put.
What was the decision on an upper hose for this setup? I am hoping to get dome hoses today.
Careful,first time you start it it may spit the belt back at you
Get well man!
What converter are you using? Long tube headers really wake these LS engines up
mine will handle 7000 but I nose over on power about 5800, so I shift at 6000. I would imagine you'll stop making power before you will hurt the...
I found the peel and seal at a roofing company in 3' wide rolls at a roofing company near my old house. I have only found the 6" stuff since then.
I check those and all the ones around sac nearly once a week and get stuff all the time.
B&M said with the kink and the tighter loops it may be too much friction. I am going to remove the shifted and run the cable and shifter under the...
Separate names with a comma.
