Fun Ford Weekend VA Motorsports Park

[bossmav]

Well I did get to see Tim and his sweet Comet on Saturday but that was all the board members I ran into.
It was HOT and Sticky on Saturday and I tripped the red light in the second round .492 The car ran great even in 94% humidly and 97 degree heat. I made a 10.21 pass at 130 MPH with a terrible 60 foot of 1.41 (track was greasy) but I enjoyed the ride. I did see some other Comets and Mavericks there and one was even a Comet sister to my Maverick (Pearl white). I finally got around to putting on the Grabber stripes and I think it makes the car look a lot better.
Here is a pix (I hope) I only got the tire off the ground about 6 to 8 inches nowhere near my best of 12 to 16 inches. As soon As I can get a better pix of my car I’ll post it.



Terry Gates

AKA Bossmav

[my comet gt]

Hey Terry
It was good to see you Saturday. I posted a few Pics on the other thread. The one of your is first and I have it in bigger size . If you want I could e-mail it to you and cropped would make a good picture I think. Sure was hot and sticky Sat. Huh.
Later Tim

[Comet155]

Cool pic. Last Friday, Mercurycruizers and I were the only 2 Comets at the T&T (no Mav's). Our last run was side by side, too bad his motor quit! Woulda been more fun if we could have gotten more than 3 runs in 6 hours though.

[Killercomet]

Nice pic Terry I sure do like the stripes.I wish I could have been there I have been piddling around at MD with my car and its in the 12s now even with bad air.went 13.07 then 13.05 so I put a friends 750 dbl pumper on same day at track and it went a 12.91 and picked up all most 3mph. 60ft went from 1.84 to 1.78.That was a T&T on a Sat. and on Sun. I picked up an 03 18ft. full deck car trailer.So now after all this time I can go elsewere.I'm thinking of going to Manasas Va. for the show of shows on Aug. 28. its all older cars only.well got to run later.

[okibono]

BossMav, what is your combo?

[Comet155]

Originally Posted by Killercomet

Nice pic Terry I sure do like the stripes.I wish I could have been there I have been piddling around at MD with my car and its in the 12s now even with bad air.went 13.07 then 13.05 so I put a friends 750 dbl pumper on same day at track and it went a 12.91 and picked up all most 3mph. 60ft went from 1.84 to 1.78.That was a T&T on a Sat. and on Sun. I picked up an 03 18ft. full deck car trailer.So now after all this time I can go elsewere.I'm thinking of going to Manasas Va. for the show of shows on Aug. 28. its all older cars only.well got to run later.

Great gains with just the pot change! Well done.

[bossmav]

okibono, I have the shock tower mod. 351W stroked to 408, 10.5 flat top 30 over pistons, h-beam rods, the real good ARP bolts, Canton main girdle and windage tray, 3 stage CNC Victor Jr heads, Trickflow roller rockers, Special grind on the Solid roller cam from Comp, Super Victor Jr intake, 850 Holley(with some trick mods), Performance Auto Trans with reverse valve body, 9 inch rear with 4.11 gears, 28 x 10.5 x 15 MT slicks and last but not least Caltracs for my big bite.

If I missed what you are looking for just let me know.

Terry Gates
AKA Bossmav

[okibono]

correct me if I'm wrong, but thats a hard running combo, no? what is your race weight? Headers, custom? What type of pistons? What size is your cam?

Thanks, that baby is hauling!

[bossmav]

Weight is 2800. Headers are Hooker 6208 swap for a 351W in a 69-70 Mustang, you can find a lot about them with a search on hooker 6208.
Pistons are Probe 2618 T-61 aluminum 30 over for a 408.
Cam is a special grind roller .662 intake .670 exh duration 254 intake 260 exh
110 lobe sep.
The block has been decked, intake and heads are port matched.
Anything else, just ask.
Bossmav

[okibono]

ok buddy, check your PM. I asked alot! lol Thanks...