Leaking around shift levers

Discussion in 'Transmissions' started by satchelmcqueen, Jul 11, 2019.

  1. satchelmcqueen

    satchelmcqueen Member

    Joined:
    Jul 18, 2015
    Messages:
    647
    Likes Received:
    161
    Trophy Points:
    118
    Location:
    rome georgia
    Vehicle:
    1970 Maverick
    What gasket or o ring do i need to stop a big leak around my shifting levers on the stock 250 c4? And is it easy to change? Never done this.

    Its didnt leak at all until i installed the b@m megashifter lever. It started a few drops and a month later its a puddle. I did have to remove the kickdown nut to i stall their bracket so i wonder if i jostled something?
     
  2. 71gold

    71gold Frank Cooper Supporting Member

    Joined:
    Apr 9, 2002
    Messages:
    26,456
    Likes Received:
    2,835
    Trophy Points:
    978
    Garage:
    1
    Location:
    MACON,GA.
    Vehicle:
    '73 Grabber
    it's a seal and an O ring. there's an O ring behind the nut and lever on the outside of the transmission. replace it first that might be your leak,
     
    satchelmcqueen likes this.

Share This Page