In the middle of an engine swap in my 77 (ish) and noticing the wiring harness isn't in great shape neither in the engine bay nor under the dash....
Will the ignition cylinder from my steering column fit in the 69.5 housing?
I'm replacing the whole column since there's not a great way to convert the entire column to a floor shift with the rack & pinion steering, etc....
I'm upgrading my column to aftermarket with no key. Has anyone moved their old ignition switch (or put a new switch) to the dash in the spot where...
I went ahead with ordering an Ididit column after more research and speaking with the Rod & Custom guys. I'll have to make the under dash mounting...
So I am converting to a B&M floor shifter and need/want to get rid of the column shift altogether. I’m leaning toward an Ididit column for my 77....
I ended up going with Chris Straub’s cams. He also convinced me to go down to the AFR 185s for my goals since I’m not looking for a high-reving...
Part 2 of this: the bearing that needs to go in at the bottom of the column is meant for a non-column shift column. The intermediate gear-selector...
Agreed. 750 is more like it as I didn’t tell the whole story. 351 block but it’s really a 408 etc. but still 850 is too big, yes!
Can anyone attest they’ve done this combo with say a Holley 850 carb? I’ve seen lots of threads and it seems most people go performer or performer...
I’ve got my block at the machine shop now (waiting on parts) for boring and a possible line hone. I need some advice on cam selection based on my...
Anyone done this swap (or simply added a lower steering bearing) WITH a column shift column? How did you handle the lower column bearing? It’s...
Got it out no problem. I found out after I pulled the large firewall plate that it has a hinging section of sorts that would have allowed me to...
Sounds good! I removed the wheel for nothing but luckily it wasn't that hard. The hardest part is removing the lower dash that spans the entire...
Thanks! That's the conclusion I was coming to based on pictures of used columns on eBay. Mine is just covered with Dynamat so I couldn't see the...
I need to get the entire steering column out of my 77 so I can do some fab work on the rag joint end for my RC swap. I got the wheel pulled and...
Well say 500 crank HP. Came from a running 94 f150. Can still see hone marks on the cylinder walls.
There’s a ton of info out there and it’s almost dizzying. When talking about cleaning up and machining a used block, what is better, hot...
Does anyone know of a replacement brake booster that points the master cylinder straight out of the firewall instead of angled up and in like it...
Resurrecting an old thread because it seems appropriate. For those who have done it, I have a few questions: Is it miserable to cut the towers...
Separate names with a comma.