Not sure of the brand but it's a fox body shaft, T5 is out of a v6 sn95 so it's a bit longer than a fox trans, I believe I used a spicer 5-1204x...
Wanted to tighten up the shifts so I installed a short throw shifter and bronze bushing[ATTACH] [ATTACH]
Thanks, still running 2.78 original diff. Would like to get it rebuilt with 3.55
Took it for its maiden voyage [MEDIA]
With a sn95 t5, the stock driveshaft would have to be shortened about an inch but I found that an aluminum foxbody fit perfectly. I found a...
For the mount, I reused the stock one and cut the center away. I used some flat stock that I already had and positioned the t5 as high as I could...
Next I swapped in a T5 out of a v6 sn95 mustang using a 94-95 sn95 v8 bellhousing. To add a clutch pedal, I took a sn95 pedal assembly. I did not...
To stiffen up the chassis is bolted on some subframe connectors and a monte carlo bar from TOPORANGER air cleaner is an aluminum 3/4 raised from...
Next came front suspension, brakes, and steering A AJE colt 65 kit allowed me to use foxbody disc brakes and fox style manual rack and pinion For...
For the interior, I added window flashing to the rust-free floor. Then installed new carpet with mass backing. Sunpro gauges to be able to...
First items I addressed were ignition, charging, and cooling Pertronix to get rid of the points. For high torque mini starter, i swapped the...
Purchased this car a few years back for a daily/hot rod build. The maverick satisfied what I was searching for which was a ford based fastback...
Added a sn95 pedal. Used a 1" od 3/4" id x 6" steel bushing. Then used bronze bushings to replace the oem plastic. Used a washer to fill in the...
Is this specific to only foxbody or would sn95 pedals work for this too?
http://www.getdiscbrakes.com/drop/Catalog/Maverick-Comet.pdf
Id take a blank as well
[MEDIA]
Separate names with a comma.
