That might be a bit biased.:D But I agree. It is good reading, and I learned alot through your experience. Thank you.
I understand that it will sit low and have a nice agressive stance with 6 cyl springs, but it dont want to bottom out on every bump i hit, and as...
Thanks for the replys guys. Does anyone know what the factory spring rate would be for a 302 ac car? This one is a 6 cyl conversion, and i was...
Alright, so in preperation for my tax return, i need to figure out some parts to buy. First up is front springs. I want handling better than...
Yea, if you got a chevy and it 'aint leaking, you had better put more oil in it quick. If they 'aint leakin, they 'aint workin, (at least not for...
Yep. Probably what happened has to do with the condesation that builds up when an engine does'nt get warm. It will start displacing all the oil,...
Chrome is pretty tough to screw up unless you break out sandpaper on it. I have had luck removing tape gunk with ronsonol lighter fluid (comes it...
The only actual reson they are there is to hold the mold cores in place when they the block is cast. If they pop out when your coolant freezes,...
Ditto, keep the leafs, 4 links are a pita to setup if you don't have some experience, doubly so for non adjustable factory 4 link styles.
I had one on my '73 for a little while, too, but my air cleaner was hitting my hood a little bit. Its probably all in the right air cleaner.
I've had problems with the accelerator pumps on them, but i think it was because all the ones I had were too old an worn out Here's what they...
Thats why ford used the carter RBS on 250s
It's a OK carb. Mopar used them on slant sixes until about '73, so thats another source if your looking for one. I think they are too tall to...
4 wires sounds right, I think 2 are for the safety switch and 2 for the reverse lights. Couldn't tell you which is which
Not true, its at the base of the column on the top IIRC, near the firewall. The 69 1/2s i'm not sure about though.
If you look in the ford performance catalog you can see pics of a T-5 and 5 speed tremec (6 speed too). The ones ford sells are rated at 330...
Legaly you need to have the system evacuated. People have been known the simply disconect the hoses and let the system discharge into the...
Your probably gonna have to make your own if you want on the cheap. Read up a bit on the subject here...
I think they want you to mark the convertor to align it up with the flexplate the same way when you put it back in. Anyway, from here you need...
Its free because it has a chunk cracked off the thermostat opening and I was wondering if it was worth the effort to fix, but it wasn't that bad,...
Separate names with a comma.
