Factory Style Rocker Panels Have Arrived.

Finally After Using the Generic Rocker Panel Veneers For Years, Our Fab Started to Make Custom Fender to in Front of Rear Wheel and fro Pinch Weld at Top To Pinch Weld at Bottom Rocker Panels, And Yes We have Been Very Happy with Those, So Now, We Asked Fab To Tool them up and Make Them For Production.

So Fab or 3PG. Has Released a Few Versions That We have Found to be a Majority of What our Restoration Facility See,s and What Cars in our Inventory Require, I will Try and Post Photos Here as well.

1. MC-RRRRP6977-36(R or L) 3PK. Is a 3 Part Kit That Repairs From in Front of Rear Wheel to 36Inches Forward, Comes with 36 inches of Complete Profile Rocker, Behind Door Quarter Patch and The In Front of Wheel, Well, Repair Patch.

2. MC-F2W69772D-(R or L) 1PK. This Front Fender to Front of Rear Wheel Complete Profile, Rocker Panel.

3.MC-FLR69772D(R or L) 2PK. This 2 Part Kit, From Under fender with Mounting Holes, and End cap, To Front of Rear Wheels, Complete Profile Rocker Panel.

These Rockers are Produced in 20 Gauge Cold Rold American Steel, and Made in the USA. Coming Soon Will Also Be in 20 Gauge Galvanized Steel as well, and Those will Be at a Slightly Higher Price.

Information on these Parts or the Other 450 Year Specific and Direct Fit Maverick Comet Parts, E-mail Patricia at patti10@aol.com

Stay Tuned More to Come,,

Joe

 

Is there a patch panel available for under the quarter and in front of rear wheel opening?

 

We Make Just about Every Panel that Rust out on these Cars, Let me Post a few Photos here for You, if You do not see it in these Photos, Please Post a Photo of the Area in Question.

Joe

 

I need the circled area for both sides of the car.

 

Yes we Have Just the Rocker By itself, 36 inch From Front of Rear Wheel, Forward, Full Profile, If You Need that I would Suggest Getting The Wheel Well Repair Patch that Caps that Rear Section of Rocker panel, Contact Patricia at patti10@aol.com These are the 2 Parts You will Need,

Joe

 

Thanks but I'm looking to just replace the small area below the quarter.

 

We Found in all The Cars that had Rust in that Spot, When Opened up and Cutting into the Rocker The Rust at Top or has Migrated Forward atleast 12 to 20 Inches, This 36 inch Part Gives you More then Enough, Just Incase. Unit Price is $75. We Do Recomend the Wheel Well Repair Patch That Caps Rear of Rocker,,

 

Those look really nice, and it's a product that's needed.