![]() |
|
|
#1 |
|
Member
|
Big bumper guys...
I was in the shop today looking at the Mavs and the Fairmont for a few minutes and something struck me...
The front bumper on the Fairmont Futura highly resembles a Mav front bumper. It is smaller in girth, but about the same width. The shape lengthwise is like the Mav. The biggest benefit I can see though is weight. The Fairmont uses a polished aluminum bumper instead of chrome steel. Now, I don't intend to unbolt the Fairmont bumper and try it on a Mav, but I thought I would throw out the possibility incase a big bumper guy wanted to use a much lighter bumper. Then it is not much bigger than the 73 bumper at that, so you would lose some bulk too. Combined with the 'slide' mod, it might be a good option. ![]() The front of the 75 is pushed against the wall with no easy way to move, and the rear of the Fairmont is against the wall with about 1" between the cars... So I didn't get a chance to measure or check rear bumper for rear bumper, but the aluminum rear bumper may be a good width as well. ??????? Thought I would throw that out. Dave
__________________
A redneck's last words: "Hey ya'll, watch this!" Last edited by ratio411; 2006-12-08 at 15:46. Reason: We reelly need spell-check! :) |
|
|
|
| Sponsored Links |
|
|
#2 |
|
Accepting Hand-me-downs
|
Now I have to do a google search to see what you are talking about...
__________________
5.0 +.040 , roller .537/.574 224/232, 1.72 roller rockers, GT40, Holley 750 Street HP on Torker 289, 3.80 w/spool, CalTracs, Hooker 6901, dual Super44 Flows, MSD 6A, everchanging custom calico paint ![]() If you don't like it, I don't care
|
|
|
|
|
|
#3 |
|
Accepting Hand-me-downs
|
This ugly old thing...or this one... Still kinda homely...Now I know what non-maverick fans think of our cars...
__________________
5.0 +.040 , roller .537/.574 224/232, 1.72 roller rockers, GT40, Holley 750 Street HP on Torker 289, 3.80 w/spool, CalTracs, Hooker 6901, dual Super44 Flows, MSD 6A, everchanging custom calico paint ![]() If you don't like it, I don't care
|
|
|
|
|
|
#4 |
|
Accepting Hand-me-downs
|
I hope I don't offend any owners of these fine automobiles...
__________________
5.0 +.040 , roller .537/.574 224/232, 1.72 roller rockers, GT40, Holley 750 Street HP on Torker 289, 3.80 w/spool, CalTracs, Hooker 6901, dual Super44 Flows, MSD 6A, everchanging custom calico paint ![]() If you don't like it, I don't care
|
|
|
|
|
|
#5 |
|
Accepting Hand-me-downs
|
A little better. Has a nice "stance"...
__________________
5.0 +.040 , roller .537/.574 224/232, 1.72 roller rockers, GT40, Holley 750 Street HP on Torker 289, 3.80 w/spool, CalTracs, Hooker 6901, dual Super44 Flows, MSD 6A, everchanging custom calico paint ![]() If you don't like it, I don't care
|
|
|
|
|
|
#6 |
|
MCCI State Rep
|
Steve (PGARFDS) has a nice Zephyr X7. I'll be down there tomorrow. I'll try to remember to look at it. We can park a Mav next to the Zephyr and take pics.
|
|
|
|
|
|
#8 |
|
Member
|
I can't tell from the angle, but the 4 door pic is of a 'regular' Fairmont.
It looks like the Futura has a little different bumper. The one in my shop is a Futura. If you look at those pics though, the bumper is not much larger than our 73 bumpers. I would like to see someone pull it off! It looks like a good swap for a big bumper. I am sure you would have to tweak mounts and such... sure looks do'able. |
|
|
|
|
|
#10 |
|
MCCI Ontario Rep.
|
Kinda funny, since both the Maverick and the Fairmont were built in the same factory, Fairmont/Zepher replaced Maverick at the St.Thomas Assembly Plant.
Good idea thought, hard to find any around here anymore. |
|
|
|
|
Interested in this thread? Receive email updates and post your own response by registering today, it's free! |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| big bumper details | EFIMAV | Cosmetic | 5 | 2006-06-09 09:37 |
| Big bumper slide? Bumper Paint? Comet GT Scoop | Halebopp | Cosmetic | 12 | 2005-04-25 13:53 |
| BIG bumper parts needed!! | av'smav | Maverick/Comet Cars/Parts Wanted | 5 | 2005-04-09 20:20 |
| question for those who have done the big to small bumper swap | Will | Technical | 6 | 2003-01-09 14:36 |